AIRSOFT ACCESSORIES

The Magpul PTS Back-up sight is not any ordinary sight, and as you can see by the photos below, they really are handsome-looking things. There's something quite muscular and "beefy" about the shape of this that give it a futuristic, cutting-edge look...

Silicone oils are Silicon based analogues of of carbon based alternatives.Silicone oil does not react or cause issues with plastics like hydrocarbons can. They are excellent electrical insulators and are non-flammable. Their temperature-stability...

A simple yet elegantly elaborate solution to a classic problem; M4 receiver front pins can become loose over time but this one can be tightened to lock in place. The shaft of the pin is three cylindrical segments separated by angled edges all...

A simple yet elegantly elaborate solution to a classic problem; M4 receiver front pins can become loose over time but this one can be tightened to lock in place. The shaft of the pin is three cylindrical segments separated by angled edges all...

11.5 cm flash hider in classic XM177 style; 14mm clockwise threading.

Patterned after the real thing, this CNC Aluminium 225mm kit adds four surfaces of accessory rails to your L85 / SA80 type weapon. This kit is designed for the G&G and ARMY L85 / SA80s. Includes RAS, installation parts and instruction manual.

Exactly what it says on the tin, this model achieves a very low weight of 256g by being little more than an L shaped piece of metal. With no length adjust or folding action, the screws and bolts can be tightened to the full providing a rock solid...

A shorter version of the larger Madbull ACE Skeleton Stock (MB-SKESTOCK-L), the longer version is M16 stock length whereas this more compact version is only 210mm long (about half that length). This makes this skeleton design a very simple, compact and...

The design ethos behind King Arms is to produce a range of products to meet different levels of gamers so that they can meet the demands of budget buyers and veterans alike. If you start off with King Arms lower end models then you can pick pick up...

Flared magazine well for the KSC gas blowback model 17/18 series pistols. Available in many different colors and styles, flared magwells can improve your speed loading by helping to guide the magazine in.

Flared magazine well for the KSC gas blowback model 17/18 series pistols. Available in many different colors and styles, flared magwells can improve your speed loading by helping to guide the magazine in.

Front pivot pin (forward receiver pin) for the VFC M4 gas blowback carbine.

Bolt charging handle for the VFC M4 gas blowback carbine; made of Aluminium.

Buffer retainer for the VFC M4 gas blowback carbine, retains the buffer (obviously) and is made of steel so it should take wear and tear well.

Steel fire selector parts set for the VFC gas blowback M4 carbine. Though the switches themselves rarely wear down, the little spring loaded nubbin does have a habit of falling out and getting lost during maintenance or wearing down sooner due to the...

Steel bolt catch for the VFC gas blowback M4 carbine, a good idea if your bolt stop is well used and runs the risk of wearing down too smooth to operate reliably.

Mounts over an M4 stock tube as such it is compatible with both AEG and GBB M4 types although just to be sure it is compatible with your exact stock tube / model of weapon do be sure to ask the sales department staff. This little module adds QD...

A short, compact little suppressor; comes with a 14mm clockwise/counter-clockwise thread adapter too. Looks great on short rifles and SMGS, on pistols it looks a bit chubby but hey it still looks cool.

Durable, lightweight polymer trigger guard for AEG M16/M4 receivers. This design features smooth organic curves and lines resulting in reduction of hard edges which can be very uncomfortable. Whats more, a polymer trigger guard is of course...

19cm long robust Aluminium piece with smooth black finish, fully licensed from Gemtech with proper design and markings. The nature of this design allows it to drop right on top of the MP5s standard 3-lug type flash hider like a QD attachment. Fits...

*Also fit the VFC 1:1 scale MP7. A combination of steel and Aluminium gives us one heck of a sturdy all-metal QD silencer. It comes with a standard style flash hider that replaces the stock one on your KSC gas blowback MP7 and allows you to drop on...

Metal short compensator for the WE 1911 gas blowback pistol series to give that 1911 of your that Punisher look. Add that bold, striking look to your pistol for that over the top aggressive profile. Available in black and silver.

Metal short compensator for the WE 1911 gas blowback pistol series to give that 1911 of your that Punisher look. Add that bold, striking look to your pistol for that over the top aggressive profile.

Tactical flashlight unit for attaching on to standard accessory rails. Comes with both a toggle switch and a paddle tether; can be permanent on, permanent off or pressure switch activated. Runs on 2x CR123A batteries (or 2x 3v rechargeable...

A tactical flashlight module that slides onto the frame of a 1911 and holds in place by replacing the slide release catch, the replacement acting as both batch and retaining pin. When in place, the end of the flashlight sits flush level with the barrel...

Officially licensed by Daniel Defense, Madbull Airsoft gives you the RIS II Rail system best suited for M4 Carbines as CQB length handguards. These rail systems require no modification to the base weapon (M4), they simply drop on. RIS rails are available...

Officially licensed by Daniel Defense, Madbull Airsoft gives you the RIS II Rail system best suited for M4 Carbines as CQB length handguards. These rail systems require no modification to the base weapon (M4), they simply drop on. RIS rails are available...

RA Tech NPAS Kit for KJ M4 gas blowback rifle. A Negative Pressure Adjustment System allows the user to adjust the gas flow to making the tweaking of the power as easy as turning the tool.

Sling swivel ring for the attachment of slings; the ring is the QD type which requires a QD slot to attach to a weapon (not included). This set comes with two QD sling swivels; a convenient package for someone looking to slap on two rings for slinging a...

G&P outer barrels attach to the standard G&P M16 / M4 series bodies via the usual barrel nut and Delta ring (or compatible alternatives). At its most basic, a replacement barrel can be used to vary the length of both the inner barrel and overall weapon...

G&P outer barrels attach to the standard G&P M16 / M4 series bodies via the usual barrel nut and Delta ring (or compatible alternatives). At its most basic, a replacement barrel can be used to vary the length of both the inner barrel and overall weapon...

Quick-detach flashlight module intended for use on railed pistols but will work on most accessory rails. Polymer housing with spring loaded switch, LED is good to illuminate out to 15m or so; runs on 3x LR44 button batteries (3 included). Rail-attach is...

Basic flash hider; all metal, standard 14mm threading with clockwise / positive turn. KAC styling; includes a metallic washer for a tight, secure fit.

Running on a CR123A battery (not included), this laser designator module is a multi-mode laser device including IR. Disclaimer: Please note this is a toy replica and should not be used for any real law enforcement or tactical use. Use of this device...

With official licensing from Daniel Defense, Madbull delivers higher quality accessories to the Airsoft community. Their newest creation is in the form of this exquisite Daniel Defense replica of their 7.0 free float Picatinny handguard. 100% CNC milled...

An all metal lever assembly which replaces your stock magazine release lever on your G&P M4 AEG magwell with this after-market version which allows magazine releasing by engaging the switch or the level on either side. Useful for left handed players...

Simply drop this into your WE / SOCOM GEAR 1911 / MEU and screw on a silencer of 120mm or greater (not included). This steps up your inner barrel length to a 235mm precision tightbore inner barrel which will improve accuracy, range and power. The...

The storm grip, as found on the M107 Barret, differs from a standard AR grip as it tapers wider towards the bottom with the rear edge following a slightly shallower decent angle then normal. The result is a shift in the grip ergonomics, the gripping...

With official licensing from Daniel Defense, Madbull delivers higher quality accessories to the Airsoft community. Their newest creation is in the form of this exquisite Daniel Defense replica of their 9.0 free float Picatinny handguard. 100% CNC milled...

Noveske licensed stealth black smooooth gas block design; on a real steel weapon an adjustable gas block is used to tune the gas calibration on the sometimes ammunition-load sensitive ARs, for Airsoft its serves no function other then to look cool, just...