ORIGINAL PART - ELECTRIC (AEG)

The KRYTAC Dust Cover Assembly comes with all of the necessary pieces to construct the dust cover; the cover, the hinge, and spring. The dust cover assembly is spring loaded to open when the charging handle is pulled. *This part is a non-firearm part...

The KRYTAC M4 Low Profile Gas block assembly is designed to be used in conjunction with AEG M4 outer barrels. This is a carbine length gas system assembly that is designed to resemble an AR15/M4 style gas impingement system and will complete the...

The KRYTAC Buffer Tube is made of metal and has a slightly larger internal diameter to help accommodate for more types of AEG batteries. The top of the buffer tube features numbers for the users reference for preferred stock position. *This part is a...

The KRYTAC Selector Switch Assembly comes complete with both the left and right selector. The KRYTAC Switch has been carefully designed to perform without impeding the shooters natural grip and shooting dynamics. Therefor the weak side selector is...

The KRYTAC M4 Sling Plate offers a sling attachment point at the rear of the lower receiver, on the left or right side, and is ideal for use with single point slings. The sling attachment points have been angled rearward to allow for a more natural and...

The KRYTAC Trigger Guard is made from aluminum and is designed to provide more room inside the trigger well for shooting with gloves. There are no sharp edges on the trigger guard and for a slight weight savings a speed hole can be found in the center of...

The KRYTAC Magazine release assembly features a metal construction and comes completely with spring, push button, and magazine catch. This magazine catch installs much more easily than standard magazine catches, there is a Philips head screw that...

The KRYTAC Charging Handle Assembly is constructed of metal and is responsible for pulling the bolt plate back and opening the dust cover. *This part is a non-firearm part and is intended for AIRSOFT use only.*

Receiver Pin Set for KRYTAC Trident M4 receivers. Designed to hold and lock the upper receiver to the lower receiver of your KRYTAC AEG.

The KRYTAC 8mm Solid Steel Bushings support the gears to stabilize rotation. Bushings are not created equal, though they look the same, the difference between one set of bushings to another is in the build materials and quality of construction. KRYTAC...

The Ambidextrous Selector Gear Set is specifically designed for the KRYTAC Trident Mechbox and Series of AEGs. These gears work in conjunction with the KRYTAC Ambidextrous Fire Selector Set to allow for fire mode selection by either left or right handed...

The KRYTAC Trigger Assembly comes complete with trigger and spring. Though it may seem insignificant, trigger characteristics are very important to accuracy. The KRYTAC trigger is specifically made with a very wide bow (front surface) and 90 edges to...

The Nautilus gearbox includes the anti-corrosive coating that give the gearbox it's unique color and the wire keep for the motor wires around the base of the gearbox. Each component on the KRYTAC Nautilus V2 Gearbox has been designed to perform at a high...

The KRYTAC 8mm Caged Ball Bearing Bushings support the gears to stabilize rotation and reduce friction and heat. Not all bearings are created equal, though they look the same, the difference between one set of bearings to another is in the build...

The KRYTAC Piston is one of the work horse components in the mechbox. The main construction of the piston is polymer. All of the polymer piston teeth are reinforced on both sides and the first 4 teeth made of metal. The 2nd to last tooth of the piston is...

The KRYTAC Cylinder Head is a hybrid construction of metal and polymer. It features an o-ring around the body to prevent air from leaking between the cylinder head and the cylinder. The KRYTAC Cylinder Head also features a dense rubber pad on the back to...

The KRYTAC Air Nozzle is constructed of high quality polymer to combat damage and wear and tear to maintain a tight air seal with the hop up bucking over time.

The KRYTAC Selector Plate features a polymer construction with metal contact tab. The metal tab on the selector plate completes the circuit for the mechbox when fire modes are selected, when SAFE is selected the circuit is incomplete ensuring the AEG...

The KRYTAC Tappet Plate is made of strong polymer to reduce wear and tear and to keep the AEG feeding properly.

The KRYTAC Enhanced Gear set comes complete with a bevel gear, spur gear, and sector gear. Each gear is made from a dense, hard, alloy and then heat treated for extra strength. Rockwell test figures on the KRYTAC Gear set show a much higher rating than...

The KRYTAC Nautilus reinforced 8mm ball bearing gearbox features an integrated MOSFET to regulate electronic signals and to protect the trigger contacts. The corners of the gearbox that surround the cylinder feature a smooth radius, as opposed to a 90...

LCT original part (#PK-302) is a direct replacement for the LCT AK/LCK/AMD series that is fully metal and constructed in M70AB2 style.

Original part (#PK-299) from LCT for AK / LCK/ AMD series, constructed in polymer. Picatinny rail interface on right side and bottom side. Styled in AK-9 style. Includes dummy aluminium heat shield.

LCT Steel bolt carrier replacement (#PK-291) for LCT LCK/ AK/ AMD series, constructed with steel. Includes retention spring.

LCT have introduced the STK stock that closely replicates the real STKBR stock, which have the following features: 1. Rubberized surface 2. Foldable to the left of receiver and locks to specific models 3. (Spring-tensioned) 6 -positions...

LCT AMD65 lower handguard with foregrip, will fit LCT AK series (except AKs74U series)

LCT AIMS style wooden lower handguard, fits LCT AK series (except AKS74U)

The LCT PP-19-01 Magazine Clip (PK-278) is designed to hold two magazines at the same time with ease. Crafted from CNC Steel which makes it more durable and gives you the upper hand in combat. Items included: 1x LCT PP-19-01 Magazine Clip (PK-278)

This is a scope mount extender for the PSO-1 scopes to be mounted on LCT SVD / VSS/ VAL / AK series as the LCT replicas are slightly taller in the receiver to accommodate for the gearbox inside. Mounts directly to the scope and replaces the original...

The LCT AK Upper Rail System (PK-213) is an awesome upgrade part for your LCT AK. Crafted from CNC Steel which makes it more durable and adds the ability to apply tactical accessories on top of the receiver. It uses the rear sight base as a hinge point,...

The LCT Magwell Spacer (PK-170) makes it easier to insert your magazines into your LCT AK. Easy to install and fixes some issues with some magazines not being able to fit in properly. Items included: 1x LCT Magwell Spacer (PK-170)

The LCT LCK47 Steel Handguards (Upper) w/ Vent Holes for Real Assembly at New Version (PK-169) is a replacement or upgrade part for your LCK47. Made from CNC Steel this will add extra weight which makes it more realistic. Fits into the LCT LCK47 New...

The LCT LCK47 Retainer for Real Assembly at New Version (PK-168) is a replacement or upgrade part for your LCT LCK47. Crafted from CNC Steel which makes it more durable and adds a bit of realism to your gun. Items included: 1x LCT LCK47 Retainer...

The LCT LCKM Retainer for Real Assembly at New Version (PK-167) is a replacement upgrade part for your LCT LCKM. Crafted from CNC Steel which makes it more durable and realistic. Items included: 1x LCT LCKM Retainer for Real Assembly at New...

The LCT TK104 Tactical Handguard Set w/o Gas Tube (PK-151) is a replacement or upgrade part for your TK104. Made from CNC Steel this will add extra weight which makes it more realistic. Fits into the LCT TK104 only! Items included: 1x LCT TK104...

The LCT SAW Style AK Pistol Grip (PK-81) is a replacement or upgrade part for your LCT AK. Crafted from quality Polymer which makes it more durable and adds a bit of realism to your gun. Items included: 1x LCT SAW Style AK Pistol Grip (PK-81) 1x...

The LCT RPK Rear Sight w/ Full Windage Adjustment (PK-64) is a replacement or upgrade part for your LCT RPK. Crafted from CNC Steel which makes it more durable and adds a bit of realism to your gun. Items included: 1x LCT RPK Rear Sight w/ Full...

The LCT AK74 Front Sight Block & Flash Hider (PK-14) is a replacement or upgrade part for your LCT AK series. Made from CNC Steel this will make it more durable and more realistic. Items included: 1x LCT AK74 Front Sight Block & Flash Hider...

The LCT LCKMS Wooden Handguard Set (PK-50) is a quality replacement part for your LCT LCKMS. Crafted from wood and polymer this makes the complete set much more durable and realistic. Items included: 1x LCT LCKMS Wooden Handguard Set Upper/Lower ...

The LCT LCK Backlite Grip (PK-45) is a replacement or upgrade part for your LCT AK. Crafted from quality polymer which makes it more durable and adds a bit of realism to your gun. Items included: 1x LCT LCK Backlite Grip (PK-45)