AIRSOFT ACCESSORIES

High precision CNC machined aircraft grade aluminum SV 3.9 for the Tokyo Marui 1911 pattern gas blowback pistol with the style of SV. This design features the layout of the classic pistol with the SV engraving. The frame is finished with a matte coat...

High precision CNC machined aircraft grade aluminum STI 3.9 for the Tokyo Marui 1911 pattern gas blowback pistol with the style of STI. This design features the layout of the classic pistol with the 2011 engraving. The frame is finished with a matte...

High precision CNC machined aircraft grade aluminum STI 3.9 with Rail for the Tokyo Marui 1911 pattern gas blowback pistol with the style of STI. This design features the layout of the classic pistol with the 2011 engraving. The frame is finished with...

The Gunsmith Bros Steel Outer Barrel is made specifically for the Tokyo Marui 5.1 Hi-Capa. It's made out of CNC steel. The silver finish was came from the titanium nitride coating, which is the same coating that used on real steel barrel and excellent...

Developed by Gunsmith Bros, the STI DVC Style Magwell is a must have for all the competition shooters out there that uses the Tokyo Marui Hi-Capa series, no matter it's 4.3 or 5.1 this would fit your standard grip and improves the entry angle of your...

Developed by Gunsmith Bros, the Limcat Style Magwell is a must have for all the competition shooters out there that uses the Tokyo Marui Hi-Capa series, no matter it's 4.3 or 5.1 this would fit your standard grip and improves the entry angle of your...

Developed by Gunsmith Bros, the Limcat Style Magwell is a must have for all the competition shooters out there that uses the Tokyo Marui Hi-Capa series, no matter it's 4.3 or 5.1 this would fit your standard grip and improves the entry angle of your...

Developed by Gunsmith Bros, the SV Infinity Style Magwell is a must have for all the competition shooters out there that uses the Tokyo Marui Hi-Capa series, no matter it's 4.3 or 5.1 this would fit your standard grip and improves the entry angle of your...

An extremely high quality Gunsmith Bros STI Style Front Sight for Tokyo Marui Hi-Capa Gas Blowback Pistols. - Requires assembly experience for installation - CNC Aluminum Construction Body

The PTS Enhanced Polymer Foregrip 2 - Short, or EPF2-S, has a carefully conceived, streamlined, ergonomic design with slightly revised texturing for superior grip and control. Dupont Zytel polymer construction and hardened steel hardware ensures its...

The PTS Enhanced Polymer Foregrip 2 - Short, or EPF2-S, has a carefully conceived, streamlined, ergonomic design with slightly revised texturing for superior grip and control. Dupont Zytel polymer construction and hardened steel hardware ensures its...

This metallic sling mount features a horizontal loop and accepts any sling and mash hooks. Since not all guns feature a front and or adjustable sling mount, this would be a great solution to sling mounting problems. A slim profile and streamline design.

The Tokyo Marui Accuracy Bipod with Fast Lock, built very well and easy to setup no tools required. Constructed from aluminum, this bipod offers a rigidity to stand your heavy gun up. Capable of raising your rifle by 6 inches to a maximum of 9 inches,...

Constructed via Taper Metal Body G&P M4A1 Metal Body set is superbly detailed and extremely robust. If you love M4A1 FRS style G&P have been releaseing, then you will most definitely love this! The lower receiver features precision engraved into the body...

Constructed via Taper Metal Body G&P M4A1 Metal Body set is superbly detailed and extremely robust. If you love M4A1 FRS style G&P have been releaseing, then you will most definitely love this! The lower receiver features precision engraved into the body...

Ever troubled by having a pistol grip that is not sturdy enough to hold your motor? The G&P Aluminum (CNC Process) Honeycomb Heat Sink Grip for Tokyo Marui & G&P M4 / M16 Series is your perfect solution. Constructed from one piece of CNC machined...

The Blackcat Airsoft Romeo Style Red Dot Sight is a perfectly suitable, low profile red dot that will mount on any rail system. It'll either ride low for pistols or come with an extra mount for a higher profile target acquisition on rifles or SMGs.Check...

An extremely high quality Airsoft Surgeon Glow Fiber Sight for Tokyo Marui Hi-Capa Gas Blowback Pistols. - Requires assembly experience for installation - CNC Aluminum Construction Body

A lot of the time, scopes are very difficult to centre. The Blackcat Airsoft Riflescope Bubble Level will definitely center the scope so you can line your sights perfectly. It will also give you an indication as to which direction your facing as the...

The VFC QRS Quick Release Stock is extended by pressing the latch underneath and it'll slide along extending to two other points. You can also open the pad which has some room for a small type of battery and makes things easier when it comes to battery...

Slim and sleek, this gas block is a gorgeous sporty little number; smooth and stealthy. In some M16 pattern weapons the gas block is functional for some kinds of front kits and in another cases its just aesthetic. In either case, if your putting a custom...

The GK Tactical Stainless Forward Assist is meant for the M4 AEG and is only there for aesthetic reasons, so why not make it look good?

The Nine Ball Aluminum Mount Base NEO is a solid scope mount for use with the Marui Hi-Capa GBB series. Comes with screws and is straightforward to install. The rail is 8.5cm long and will fit any typical red dot sight.

The Alpha Parts Motor Grip with CNC Grip End Plate is a upgrade part for the Systema M4 PTW.

The 5KU Magwell is a must have for all the competition shooters out there that uses the Tokyo Marui Hi-Capa series, no matter it's 4.3 or 5.1 this would fit your standard grip and improves the entry angle of your magazine, making it a breeze to...

The 5KU Magwell is a must have for all the competition shooters out there that uses the Tokyo Marui Hi-Capa series, no matter it's 4.3 or 5.1 this would fit your standard grip and improves the entry angle of your magazine, making it a breeze to...

The 5KU Magwell is a must have for all the competition shooters out there that uses the Tokyo Marui Hi-Capa series, no matter it's 4.3 or 5.1 this would fit your standard grip and improves the entry angle of your magazine, making it a breeze to...

The 5KU Magwell is a must have for all the competition shooters out there that uses the Tokyo Marui Hi-Capa series, no matter it's 4.3 or 5.1 this would fit your standard grip and improves the entry angle of your magazine, making it a breeze to...

The 5KU Punisher Compensator For Tokyo Marui 1911 series are a drop in accessory for the Tokyo Marui M1911 series. By removing the original barrel bushing and adding this aluminium compensator, it adds a little weight in the front to counter...

The 5KU Punisher Compensator For Tokyo Marui 1911 series are a drop in accessory for the Tokyo Marui M1911 series. By removing the original barrel bushing and adding this aluminium compensator, it adds a little weight in the front to counter...

The 5KU Punisher Compensator For Tokyo Marui 1911 series are a drop in accessory for the Tokyo Marui M1911 series. By removing the original barrel bushing and adding this aluminium compensator, it adds a little weight in the front to counter...

The PTS Enhanced Polymer Stock (EPS) is a full function collapsible polymer stock that offers the user lots of flexibility in how to utilize it. Like all the other PTS polymer products, it is manufactured with authentic Dupont Zytel polymer for superior...

The purpose of the Mk 18 Mod 0 is to provide operators with a weapon of submachine gun size, but firing a rifle cartridge, for scenarios such as VIP protection, urban warfare, and other close quarters battle (CQB) situations. In Airsoft terms, the...

Officially licensed by Fortis Manufacturing for Airsoft use only! The Fortis SWITCH is an extremely lightweight, yet robust free float rail system designed for the 5.56MM platform. When designing the SWITCH, Fortis wanted a handguard that was easy to...

The Balystik line have two female couplers that stops air immediatly when disconnecting, one located at the end of the regulator, the other one is at the end of the line, so you can disconnect your gun and keep your line under pressure, you can also...

The Balystik line have two female couplers that stops air immediatly when disconnecting, one located at the end of the regulator, the other one is at the end of the line, so you can disconnect your gun and keep your line under pressure, you can also...

The Balystik line have two female couplers that stops air immediatly when disconnecting, one located at the end of the regulator, the other one is at the end of the line, so you can disconnect your gun and keep your line under pressure, you can also...

The HPR800C V3 High pressure regulator is a regulator specifically developed for the HPA gearboxes. You can adjust the pressure on both sides thanks to the tune in wrench included. This new version is lighter than the previous one and includes an...

HPA valve without drilling, suitable for KJ / WE GBB or GBBR magazine with 5mm thread. Also Works on Stark Arms G17 & M&P9 magazines. Other models are potentially compatible. These HPA valves boots seal thanks to the addition of blocking resin on the...

HPA valve without drilling, suitable for Tokyo Marui GBB or GBBR magazine with 5mm thread. These HPA valves boots seal thanks to the addition of blocking resin on the thread, allowing different positions levels depending on the brands and models. GBB...